Importing data with inversed rows/columns
Posted: Sun Feb 01, 2015 10:09 am
If the source data file contains samples in single lines and comma-separated DPlot seems not be able to load the data.
E.g.:
Channel1,100.1,115.3,118,3,125.0,120.5,115.3,
Channel2,125.0,120.5,115.3,100.1,115.3,118,3,
Involves quite some source file pre-processing before achieving a readable file. (e.g. www.robemus.com/temp/oscGabotronicsOutput21.csv)
Would be helpful if DPlot could "understand" at least the format I gave above. The example file is even harder to understand with three headers (text and numbers) and text containing spaces but these are easily corrected manually before importing into DPlot.
E.g.:
Channel1,100.1,115.3,118,3,125.0,120.5,115.3,
Channel2,125.0,120.5,115.3,100.1,115.3,118,3,
Involves quite some source file pre-processing before achieving a readable file. (e.g. www.robemus.com/temp/oscGabotronicsOutput21.csv)
Would be helpful if DPlot could "understand" at least the format I gave above. The example file is even harder to understand with three headers (text and numbers) and text containing spaces but these are easily corrected manually before importing into DPlot.