|
Stat_RefLine macro command |
  
|
|
Stat_RefLine macro command |
|
Macro commands may be used either in macros or by sending the commands to DPlot via dynamic data exchange (DDE). Some commands are valid only in macros (noted by Macros Only). Commands sent to DPlot via DDE must be enclosed by square brackets [ ]. Macro commands should not include the brackets.
Command parameters shown in the descriptions below are placeholders for the actual values. Command parameters are either numeric values or character strings; character string parameters are always bound by double quotation marks.
All indices into arrays are 1-based, e.g. Curve1=1 refers to the first curve in a plot.
A 0x prefix for numbers in the descriptions below indicates hexadecimal notation; e.g. 0x0010 = 16.
JR/Viewer indicates that the command is supported by DPlot Jr or DPlot Viewer.
JR/Viewer indicates that the command is NOT supported by DPlot Jr or DPlot Viewer.
[Stat_RefLine(draw,value,style,width,color,"text")] |
|
Obsolete, but supported. Preferred command is Refline.
Adds a reference line to the plot, drawn across all groups. Each plot may have up to 2 reference lines (use Stat_Refline twice to add the second line).
| Draw = | 1 to draw the line, 0 if line should not be drawn. |
| Value = | Amplitude of the line |
| Style = | Line style to use for line |
1=solid line
2=long dash
3=dotted
4=dash dot
5=medium dash
6=dash dot dot
| Width = | Width of pen used to draw the line, in 1000'th inch units |
| Color = | Color of the line, red + green*256 + blue*65536 |
| Text = | Text that appears in the legend. Use "" for no legend entry. |
Page url: http://www.dplot.com/help/index.htm?stat_reflinecommand.htm