DPlot Forum Index DPlot
http://www.dplot.com
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Reference Lines w/fractional second time formats

 
Post new topic   Reply to topic    DPlot Forum Index -> Bug Reports
View previous topic :: View next topic  
Author Message
raswaim



Joined: 06 Jan 2005
Posts: 69
Location: Houston, TX

PostPosted: Tue May 20, 2008 12:06 pm    Post subject: Reference Lines w/fractional second time formats Reply with quote

I've run into an issue with using Date/Time formats like MM/DD/YYYY HH:MM:SS.000 on x axis reference lines. If you open the reference line dialog and type in the time value, the line will be placed in the correct location. However, if you come back to the dialog and make any other change (line type, line width, etc), when you hit OK the line snaps to the nearest second. I had the X-Axis set to the same data format, so apparently when the dialog value field is populated with the reference line value, the full X-Axis format isn't used, dropping the subseconds.
_________________
- RAS
Back to top
View user's profile Send private message
DPlotAdmin
Site Admin


Joined: 24 Jun 2003
Posts: 2310
Location: Vicksburg, Mississippi

PostPosted: Tue May 20, 2008 1:02 pm    Post subject: Reply with quote

Thanks Richard. Sorry for the trouble, will fix this ASAP.
_________________
Visualize Your Data
support@dplot.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
raswaim



Joined: 06 Jan 2005
Posts: 69
Location: Houston, TX

PostPosted: Tue May 20, 2008 2:50 pm    Post subject: Reply with quote

Thanks David. On a similar note which might have bearing on general design, you might want to try setting the y-axis to Hexadecimal and try labeling a point. Also, try entering a hex value for a Y-reference line with the axis set to hexadecimal (hint: hit delete, it's the only way out...). I can generally avoid these two funnies though, so the subsecond thing is way higher priority for me. Thanks again, great tool and great service.
_________________
- RAS
Back to top
View user's profile Send private message
DPlotAdmin
Site Admin


Joined: 24 Jun 2003
Posts: 2310
Location: Vicksburg, Mississippi

PostPosted: Tue May 20, 2008 3:29 pm    Post subject: Reply with quote

Wow, that's ugly. Thanks again, will fix.
_________________
Visualize Your Data
support@dplot.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
DPlotAdmin
Site Admin


Joined: 24 Jun 2003
Posts: 2310
Location: Vicksburg, Mississippi

PostPosted: Sat May 24, 2008 3:10 pm    Post subject: Reply with quote

Richard,
The problems mentioned in this thread are fixed in today's 2.1.7.2 update. Thanks again for pointing out the problems.
_________________
Visualize Your Data
support@dplot.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    DPlot Forum Index -> Bug Reports All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group