When I execute the following macro command
ret = DPlot_Command(DocNum, "[SetBackgroundImage(""d:\dplot_files\image.png"", 1, 1, 1, 255)]")
the image is not placed in the foreground. I know that Dplot is using the command, as the plot extents are being adjusted to fit the image size.
Also, if I open the Dplot file I can get the image (which is listed Filename box) to be in the foreground by checking the "foreground" box.
Thanks in advance for the help.
SetBackgroundImage Macro Command
- DPlotAdmin
- Posts: 2312
- Joined: Tue Jun 24, 2003 9:34 pm
- Location: Vicksburg, Mississippi
- Contact:
Use
[SetBackgroundImage(""filename"",1,1,0,0,0,0,1,255)]
If you're going to set the foreground or transparency, then left, top, right, bottom must be specified even though in this case they will not be used.
[SetBackgroundImage(""filename"",1,1,0,0,0,0,1,255)]
If you're going to set the foreground or transparency, then left, top, right, bottom must be specified even though in this case they will not be used.
Visualize Your Data
support@dplot.com
support@dplot.com